Stainless Steel 316L
£3.50 Inc Vat
SS 316 is an advanced metal wire used to wrap your own coils for rebuildable atomisers, RTAs & drippers. It can be used for both wattage/power and temperature control modes. A 10m roll like this will make 50-100 standard coils.
SS 316 wire has a very low resistance and is for advanced users only – the resistance is much lower than standard kanthal and will draw a large amount of power from your batteries – please make sure that you a…
Electrical resistivity ( µOhmcm ) 70-78
Temperature coefficient ( K-1 ) –
Elongation at break ( % ) <60
Hardness – Brinell 160-190
Izod impact strength ( J m-1 ) 20-136
Modulus of elasticity ( GPa ) 190-210
Tensile strength ( MPa ) 460-860
Density ( g cm-3 ) 7.96
Melting point ( C ) 1370-1400
Coefficient of thermal expansion @20-100C ( x10-6 K-1 ) 16-18
Specific heat @23C ( J K-1 kg-1 ) 502
Thermal conductivity @23C ( W m-1 K-1 ) 16.3
It is important to understand the resistance variation of SS 316 and choose the right gauge/diameter. We recommend always using an ohms reader if using a mechanical mod – most variable wattage devices will read your ohms – for a standard coil build we recommend 6-8 wraps.
It is also helpful to use an online voltage/wattage/resistance calculator like this
Keep out of reach of children. Wash hands thoroughly after handling. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Dispose of container in accordance with local regulations.
Vaping is for adults only.
Please confirm that you are 18 or over.No