Nichrome Ni80

£3.49 Inc Vat

Clear

10m Reel

Ni80 is an advanced metal wire used to wrap your own coils for rebuildable atomisers, RTAs & drippers. It is designed to be used for wattage/power mode. A 10m roll like this will make 50-100 standard coils.

Ni80 wire has a very low resistance and is for advanced users only – the resistance is much lower than standard kanthal and will draw a large amount of power from your batteries – please make sure that you are only using high amp rated batteries that are in excellent condition and that your regulated mod can safely fire to a low resistance or if you are using a mechanical mod, that you know absolutely everything about battery safety, building and wicking your coils correctly. If you are unsure about the compatibility of your device and Ni80, we advise against purchasing this product.

Full Description

Dimensions of Wire:
Length – 10m
Spool Type – Large plastic bobbin.

Technical Specifications:
Ni – Rest
Cr – 20.0 – 23.0
Fe – <1.0 Max Continuous Service Temp Of Element - 1200 Density (g/cm3) - 8.40 Thermal Conductivity (KJ/m.h.oC) - 60.3 Coefficient of Lines Expansion - 18.0 Melting Point (approx) (oC) - 1400 Elongation at Rupture (%) - >20
Micrographic Structure – Austenite
Magnetic Properties – Nonmagnetic

….

It is important to understand the resistance variation of Ni80 and choose the right gauge/diameter. We recommend always using an ohms reader if using a mechanical mod – most variable wattage devices will read your ohms – for a standard coil build we recommend 6-8 wraps.

It is also helpful to use an online voltage/wattage/resistance calculator like this

Nicotine Warnings
Warning Symbol Warning: Harmful if swallowed

Keep out of reach of children. Wash hands thoroughly after handling. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Rinse mouth. Dispose of container in accordance with local regulations.

Vaping is for adults only.


Please confirm that you are 18 or over.

Yes No